Go! Ethel Go!

http://www.energeticforum.com/renewable-energy/6130-steorn-orbo-vs-alt-snakeoil-tk-orbette.html

Steorn ORBO vs alt.snakeoil TK ORBETTE

Another blogger here on energeticforum has claimed that TK's Orbette replication is meaningless, as it was not built to the real-deal plans that Steorn is selling.

If you watched the Waterways demo (vids are available on YouTube) and seen TK's Orbette YouTube vids, please post your opinions.

IMHO, there is no meaningful difference between what TK shows and what Steorn showed. Remember also that Steorn NEVER published any input or output power measurements nor did they ever come through with the German Calo testing which they promised during the demo.

Nor did they ever publish any of the alleged third-party test results which were supposedly collected during the Waterways demo.

Let's also not forget the HONKING HUGE BATTERY that Steorn used to power the Orbo devices.. That battery is rated at 10,000mAh - do you know how much energy that is, from a full charge? Do the math, then compare that figure to a rough guestimate of how much power the Orbo device needs to run at a lazy 1000-1500 RPM.

Steorn showed f-ck all.

Ethel better watch out....Ashtwit's probably got his panties all in a bunch because TK banned him from posting on the video. Tit for tat, that was. Revenge is a dish best served cold.

I'm sure Ethel will be welcome here...if not already here.

Posted By: GuruMore and more, I have suspicion that e-Orbo coils are NOT made from standard materials.

These may be MagAmp or Finemet or so

Thus Ashtweet is all right: TK machine is not same as 0,034 Watt e-Orbo

It's also not the same in the sense that vital parts of Alsetalokins configuration are not configured as they should be. You can make an engine LOOK like an engine but if you put the pistons in sideways it certainly won't perform like an engine.

TK's "machine" is a normal pulse motor despite his protests that it's an Orbo. Since he is using guesswork to build it, it's hardly surprising. 419 euros would get him a look at the bits he's missing.

Ah well, never mind.

Posted By: MileHighSteorn's "machine" is a normal pulse motor despite their protests that it's an Orbo.

That's the crux of the matter.

MileHigh

You'd know of course given the fact you have ZERO access to any Orbo plans. Al's piece of junk is a back emf creator of epic proportions, unlike Orbo which produces absolutely no back emf whatsoever.

Posted By: MileHighScrew the back EMF nonsense, it means absolutely nothing. The house of cards will eventually come crashing down and you will be left holding an empty bag, the Steorn glue all dried up and the buzz gone.

So your technical response is "screw the back EMF nonsense". That says it all mate. Well done on understanding f*ck all about a basic eOrbo reaction.

PS You owe me glue.